Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Changing the filter bag
Open dust extractor with T-Loc [6]. Attention:
Risk of tilting!
6
Changing the filter bag:
Remove filter bag [7].
7
Insert a filter bag [8].
8
Close dust extractor with T-Loc.
Changing the filter element
NOTE
Motor damage
Never operate the extractor without a filter ele-
ment fitted as the motor may become damaged.
9
1
Open dust extractor with T-Loc [6]. Attention:
Risk of tilting!
Unlock and fold down lever.
Remove container upwards.
Remove used filter element and replace with a
new one.
Dispose of the used filter element in accordance
with statutory regulations.
Clean container and seals.
Insert container. Fold up and lock lever.
Close dust extractor with T-Loc.
The order numbers for accessories, filters and
consumables can be found in the Festool cata-
logue or on the internet at www.festoolusa.com.
Observe the following instructions:
– Before transportation, always close the T-Loc at
the dust extractor or connect to the storage box.
– For transportation in vehicles, secure the device
[9]
against slipping and tilting in accordance with the
valid guidelines.
Do not dispose of the device as domestic waste!
Dispose of machines, accessories and packaging at
an environmentally responsible recycling centre.
Observe the respective national regulations.
2
Transport
Environment
15
Publicité
Chapitres
Table des Matières
