Changing The Timer Settings; Changing Between Fahrenheit And Celsius; Updating The Firmware - Hatco Flav-R-Savor FS2HAC-15 Manuel D'installation Et D'utilisation

OPERATION

Changing the Timer Settings

Use the following procedure to change the time setting on each
of the product timers.
1. Move the Power I/O (on/off) switch to the I (on) position.
• The unit will turn on and the touchscreen controller will
energize and show the Home Screen.
2. Touch the key.
• Enter the password [2 4 8] using the number icons that
appear.
• The Service screen will appear on the display.
3. Touch the TIMERS key on the Service screen to access
the Timers screen.
NOTE: The check boxes on the
Timers screen correspond
with each available product
timer, when viewing unit
from the operator side.
Touch the appropriate
check box to toggle the
timer between visible and
invisible on the Home
screen.
4. Touch the MAXSETTING key on the Timers screen to
access the timer settings.
a. Touch the SET key to
highlight the first timer
setting.
b. Touch the red or
on the display to change the
timer setting.
c. Touch the next desired timer
setting to make it active for
change, and repeat the previous step to change the
setting.
d. Touch the DONE key when timer setting changes are
complete.
5. Touch the key to save the settings and return to the
Home Screen.
Timers
Select Con g
(Max 8 timers)
MaxSetting
0:40 0:40
0:40 0:40
0:40 0:40
key
Set

Changing Between Fahrenheit and Celsius

Use the following procedure to change the air temperature unit
of measure between celsius and fahrenheit.
1. Move the Power I/O (on/off) switch to the I (on) position.
• The unit will turn on and the touchscreen controller will
energize and show the Home Screen.
2. Touch the key.
• Enter the password [2 4 8]
using the number icons that
appear.
• The Service screen will
appear on the display.
3. Touch the CONTROL key on
the Service screen to access the Control Settings screen.
4. Choose the desired unit of measure on the "Units" line:
• Touch the "F" box to select
fahrenheit.
• Touch the "C" box to select
celsius.
NOTE: The box for the active unit
of measure is highlighted in
green.
5. Touch the key to save the settings and return to the
Home Screen.

Updating the Firmware

Use the following procedure to perform a firmware update on
the touchscreen controller.
1. Move the Power I/O (on/off) switch to the I (on) position.
• The unit will turn on and the touchscreen controller will
energize and show the Home Screen.
2. Touch the key.
• Enter the password [2 4 8] using the number icons that
appear.
• The Service screen will appear on the display.
3. Touch the FIRMWARE key on the Service screen to access
the Firmware Update screen.
4. Insert the USB drive into the
USB port next to the controller,
and touch the UPDATE key on
the Firmware Update screen.
• The update will begin. When
complete, the touchscreen
controller will restart and
show the Home screen.
8
English
Service
Firmware Usage
Control Timers
Testmode Temp
Control Settings
Units F C
Version 01.00.27
Firmware Update
Plug-in the USB stick, then
press the Update button.
Update
Form No. FS2HAC15M-0420