Güde GKM 800 Traduction Du Mode D'emploi D'origine page 6

We are not liable for any damage caused as a result of
any unauthorised repair and unauthorised handling or
use contrary to the use as designated.
Sweeping of any gel, liquid, combustible,
explosive, hot and unhealthy substances prohibited.
Use as designated
Sweeping of flat and dry surfaces – e.g. entries, terraces,
courtyards, etc.
Disposal
Disposal instructions are illustrated in the form of
pictograms on the device or packaging. Description of the
pictograms is given in "Identification" chapter.
Disposal of transport packaging
Packaging protects the device against damage during
transport. Packaging materials are usually selected
according to their effect on environment and disposal
methods and can therefore be recycled.
Returning of the packaging back to circulation saves
resources and costs for packaging disposal.
Parts of the packaging (e.g. foil, styropor) may be
dangerous for children. Risk of suffocation!
Keep these parts of the packaging out of reach of children
and dispose as soon as possible.
Emergency Action
Apply the first aid adequate to the injury and get qualified
medical assistance as quickly as possible. Protect the
injured person from more accidents and calm him/her down.
For the sake of eventual accident, in accordance with
DIN 13164, a workplace has to be fitted with a first-aid
kit. It is essential to replace any used material in the
first-aid kit immediately after it has been used. If you
seek help, state the following pieces of information:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Handling requirements
The operating staff must carefully read the Operating
Instructions before using the appliance.
Qualification
Apart from the detailed instruction by a professional no
special qualification is necessary for using the appliance.
Transport and storage
For any longer storage the appliance must be thoroughly
cleaned and stored so as unauthorised persons could not
access it.
- Empty the dirt collecting container
- Adjust the brushes to relieve them
- Store the appliance when it is dry
- To save spaces, the sliding handle can be folded.
Loosen the screws, pull the sliding handle out
and fold forward.
Assembly (pic. 1, 2)
When putting the appliance into working order, it is enough
just to fold up the sliding handle and tighten the screws
included in the supply.
Now adjust the sliding handle height. Loosen the screws (pic.
1/6), select the required fixture and fix the sliding handle in the
desired height.
Operation (pic. 3)
When the sweeper is moved, the feeder brushes (pic. 3/5) and
sweeping brushes (pic. 3/8) start rotating, helped by the belt
drive. Rotating feeder brushes (pic. 3/5) drive the dirt to the
centre. It is then collected by both sweeping brushes, running
opposite each other (pic. 3/8) and taken to the dirt collecting
container (pic. 3/3).
Adjustment of feeder and sweeping brushes
Depending on the type of use and wear, it is possible to
centrally adjust the height of feeder brushes and the back
sweeping brush. Turn the central screw for height adjustment
(pic. 1/5). The deeper you adjust the appliance, the closer to
the ground the feeder brushes are going to be and the more
difficult it is going to be to move the appliance forward.
Emptying the dirt collecting container
If you want to take out the dirt collecting container (pic. 1/3) to
empty it, take it by its handle and pull up.
If metal, glass or sharp objects have been swept, it is necessary
to use firm working gloves when emptying the dirt collecting
container.
Inspections and maintenance
Use a wet cloth for plastic parts cleaning. Do not use
any cleaning agents, solvents or sharp objects.
After every use
Remove the appliance off dust and dirt.
Empty the dirt collecting container.
Except the above, the appliance needs not be maintained any
further.
Service
Any technical questions? Complaint? Do you need spare
parts or operation manual?
Go to our website www.guede.com and the section Service
will help you quickly and without bureaucracy. Please, help us
to help you. In order to identify your device in case of complaint,
please indicate serial number, order number and year of
manufacture. All information is available on the product label.
To have all information always at hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Important information for the customer
Please be sure to know that returning the product in or after the
warranty period must be made in the original packaging.