Stand; Commissioning; Scope Of Delivery - Tintometer Lovibond SD 335 Multi Mode D'emploi

2 .6 Stand

Stand folded shut. The
instrument can be hung
up on a strap

3 Commissioning

Charge the batteries by plugging an AC adapter or computer into the Micro-USB socket.
Connect all required sensors and temperature probes. Then switch on the device by pressing
the on/off button.

3 .1 Scope of delivery

SD 335 Multi(Set 1)
• Basic instrument
• pH/temp. electrode
• Conductivity electrode
• Calibration solutions
• Storage solution
• Electrode holder
• 3 x AAA NiMH
• Protective armour
• Operating instructions
SD_335_1 10/2020
Pull
Pull to expand
SD 335 Multi (Set 2)
• Basic instrument
• pH/temp. electrode
• DO electrode (2 m cable)
• Calibration solutions
• Storage solution
• Calibration flask
• KOH electrolyte solution
• Replacement membrane
heads
• Electrode holder
• 3 x AAA NiMH
• Protective armour
• Operating instructions
1 x pull:
Set up the instru-
ment on a table
SD 335 Multi (Set 3)
• Basic instrument
• pH/temp. electrode
• DO electrode (2 m cable)
• Conductivity electrode
• Calibration solutions
• Storage solution
• Calibration flask
• KOH electrolyte solution
• Replacement membrane
heads
• Electrode holder
• 3 x AAA NiMH
• Protective armour
• Operating instructions
2 x pull:
Hang the
instrument on
a screw
41