Publicité
Les langues disponibles
Les langues disponibles
With the purchase of this digital measuring and regulating equipment, you have selected a top quality product.
It has been specifically designed for aquaristic purposes.
With this unit, you can continuously measure and control the temperature of the water in your aquarium. This
unit can be connected to either a heating or cooling unit.
1. Features
Aqua Medic Computers are microprocessor-controlled units. They are safe, reliable and meet all requirements
of professional measuring and regulating units.
The Aqua Medic Temperature Computer is delivered with a temperature sensor. The heater or cooler can be
connected to the female side of the power plug.
Technical Data
Micro-processor controlled
Power requirements
Output triac-controlled
Measurement range
Adjustment range
Adjustments
Adjustment directions
Sensor
Data memory
3. Installation
1. Connect to 230 V power source.
2. Connect the temperature-electrode.
3. Turn the unit on or off by pressing the „on/off" button.
4
Operation Manual ENG
230 V/50 Hz
6 A, 1,000 W
0 - 100° C
Heater and cooler: 1 - 40° C
Heater: proportional impulse controlled (PID), only for
ohm-resistors
Cooler: on/off (2 point control)
Hysteresis: 0.5° C
Heater or cooler, adjustable
Digital temperature sensor, glass shaft
Power loss protection
2. Description of front panel
1.
Digital display
2.
„Temperature" button
3.
„On/Off" button
4./5. „+" and „-" buttons
Publicité
