Landxcape LX790 Guide D'installation page 8

Installation
8
1. Place the charging base
Find a flat surface for the charging base, the place should be dry and away
from direct sun light. And the adapter can be mounted on the wall.
Landxcape TM 's charging base can be placed against the wall or fence, with
the charging components facing your lawn. If possible, place the charging
base in the shade, and it is better to charge the battery in a cool place.
When laying the boundary wire, leave at least 150cm of straight wire with
no obstacles on each side of the charging base. Make sure the adapter
and electrical outlet are always kept in a dry place.
You can now permanently fix the charging base to the ground by
tightening the supplied base fixing nails with the supplied hex key.
NOTE: Boundary wire on each side of the charging base should
be straight for 150cm without corners or obstacles to ensure
The charging station must be positioned on relatively level ground. It must
not be positioned on an inclined surface or anywhere that makes its plate
bend.
EN