1
2
max
Remove
Fill water tank with
water tank.
fresh and cold drinking water.
5
6
On
Press On / Off button briefly
Keep handle closed. Place a
(1 second).
heat-safe cup under spout.
9
10
1x
Push button to rinse.
WARNING: Extremely hot water.
3
4
Insert water tank.
7
8
Blinking lights indicate machine
Solid green lights indicate
is warming up.
machine is ready.
11
12
Machine is preparing for next
Discard liquid when finished.
rinse cycle.
Repeat steps 9 – 12 four more times.
Setting up your
Verismo® System
600 (
IMPORTANT:
must be primed before first use and any time
the unit is run dry or runs out of water.
Please read important
safeguards first on page 4.
WARNING: Make sure the handle is closed
completely during use. Extremely hot water
runs through the appliance when operating
(brewing, descaling, cleaning, rinsing). To
avoid the risk of scalding or other injury,
always keep the handle in the closed/down
position while machine is operating. Do not
reach under the spout and do not remove the
drip tray while appliance is operating.
IMPORTANT:
9 — 12 four more times to prepare
machine for first use.
EN
Priming the machine)
The Verismo® machine
WARNING
Repeat steps
7