Specifications
EN
Emptying the
EN
machine
14
120 V ~, 60 Hz, maximum 1,450 W
39.4 in / 1 m
P
ressure
maximum 275 psi / 19–bar
33.8 fl oz / 1 L
8.38 lb / 3.8 kg
A = 5.9 in / 150 mm
C
B = 14.88 in / 378 mm
A
C = 11.69 in / 297 mm
B
Empty the residual water if the appliance should be transported or stored during frosty conditions (temperatures below 32°F / 0°C). This
prevents residual water from freezing inside the appliance.
Let appliance warm up to room temperature if necessary. Make sure that the appliance is switched off. Open handle and close it again.
Remove and empty the water tank. Press the Espresso and Milk buttons at the same time, hold them and press the Power button for at least
three seconds. Evaporation will start. Wait until evaporation is finished. Reinsert emtpy water tank. Wipe and dry the front of the appliance
with a cloth.
WARNING
WARNING: Extremely hot water
The steam temperature can be as high as 248°F / 120°C. Do not reach under the spout and keep at a distance from spout.
WARNING: Extreme temperatures
• Protect the appliance against frost.
• Do not operate the appliance above 115°F / 4 5°C to avoid risks to the appliance (temperature range for operation is 50–115°F / 10–45°C).
• Do not operate the appliance below 50°F / 10°C to avoid risks to the appliance (temperature range for operation is 50–115°F / 10–45°C).
maximum 5.9 in / 150 mm
50°F–113°F / 10°C–45°C
approximately 199°F / 93°C