JB Systems USB 1.1 Mode D'emploi page 8

ENGLISH
 PITCH BENDING:
This function is used to synchronize the beats of two tracks. This can be done in two ways:
 PITCH BEND buttons: The speed increases or decreases respectively as long as the PITCH BEND+
or PITCH BEND- buttons are pressed.
 JOG WHEEL: During play mode the JOG WHEEL will temporarily bend the pitch of the music by
turning the JOG WHEEL clockwise to speed up or counterclockwise to slowdown. The rotation speed
the JOG WHEEL determines the percent of pitch bend.
 PLAYING/RECORDING CD-R and CD-RW:
Apart from normal audio CD's the USB1.1 can play both CD-R (CD recordable) and CD-RW (CD
rewriteable). Please note that you should always use the "disc at once" and "track at once" disc writing
options! Although the USB1.1 is capable of reading CD-R and CD-RW recorded at higher speeds, we
suggest not using recording speeds more than x12 to increase readability. Always buy good quality brands
for CD-R and CD-RW!
If the disc is multi session, it will only play the first session:
 if the first session is CD-DA you can only play CD-DA tracks.
 if the first session is MP3 you can only play MP3 files.
ABOUT LOOPS:
 CREATE A LOOP:
While a track is playing, press the LOOP IN button to program the start point of the loop. Now press the
OUT button to program the endpoint of the loop. The seamless loop starts playing at once. (With some
practice you will be able to create perfect loops!) While the loop is playing, you can press the OUT button
again to exit the loop and continue the rest of the track.
It is possible to program a new loop, even when the current loop is still playing. While the loop is playing,
simply press the LOOP IN button to set the starting point of the new loop. Now enter the endpoint by
pressing the OUT button. Your new loop is programmed and playing.
 RESTART A LOOP:
This can be done in 3 ways:
 When a loop is programmed and you left it by pressing the OUT button, just press RELOOP to restart
the loop.
 When a loop is programmed and you left it by pressing the OUT button, just press OUT again to restart
the loop. The point where you pressed OUT is now programmed as the new endpoint of the loop.
 When the loop is still playing, press the RELOOP button to restart the loop immediately. You can
repeat this several times to create a "Stutter" effect.
 EDIT A LOOP:
When a loop is programmed, press the RELOOP/STUTTER button for about 2 seconds to enter "loop edit"
mode. While the loop is seamlessly playing, the display shows the time information of the loop endpoint.
Use the jog wheel to set the new loop endpoint. To make things very easy you can hear your modifications
to the loop endpoint continuously. When the loop is perfect, press the LOOP OUT button to save the new
loop endpoint.
JB SYSTEMS 11/78
®
OPERATION MANUAL
USB1.1
ENGLISH
SPECIFICATIONS
Power Supply:
Power Consumption:
Output level (+/-0.5dB @ 1kHz,0dB):
Frequency resp. (+/-0.4dB / +/-0.2@0dB):
THD + noise (@ 1kHz, 0dB):
S/N Ratio (@ 1kHz, 0dB (IHF-A weighted):
CD Short access time (next track):
CD Long access time (track 1  20):
CD Electronic tracking:
MP3 FORMAT:
Possible file extensions:
ISO9660:
Joliet:
CD-ROM sector format:
USB file system:
Max. Hard disk capacity:
Max. Folders:
Max. Tracks / Folder:
Max. Files:
MP3 FORMATS:
MPEG1 Layer3 (ISO/IEC11172-3):
Bitrates:
Bitrate modes:
MPEG2 Layer3 (ISO/IEC13818-3):
Bitrates:
Bitrate modes:
MPEG2,5 Layer3:
Bitrates:
Bitrate modes:
Dimensions:
Weight:
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.beglec.com
JB SYSTEMS 12/78
®
OPERATION MANUAL
AC 100-240V 50/60Hz, USB port: 5Vdc – 0.5A
13W
CD: 2.0Vrms USB: 1.85Vrms
CD: 17-20.000Hz USB: 17-16.000Hz
CD: 0.008% USB: 0.007%
CD: >126dB USB: >85dB
<2sec
<4sec
Full automatic digital tracking.
.mp3 ~ .MP3 ~ .mP3 ~ .Mp3
max. 63 character style
max. 63 character style
mode-1 only
FAT 12/16/32
500GB
CD: 255 USB: 999
CD: 255 USB: 999
CD: 999 USB: 9999 (Track Indexer software)
mono / stereo sampled at: 32 - 44,1 - 48kHz
32 – 320 Kbps
CBR (Constant Bitrate), VBR (Variable Bitrate) or Xing
mono / stereo sampled at: 16 – 22,05 - 24kHz
32 – 160 Kbps
CBR (Constant Bitrate), VBR (Variable Bitrate) or Xing
mono / stereo sampled at: 8 – 11,025 - 12kHz
32 – 160 Kbps
CBR (Constant Bitrate), VBR (Variable Bitrate) or Xing
482(W) x 88.8(H) x see drawing (D) mm
4,35kg
USB1.1