Pentax D-BG1 Mode D'emploi page 13

ATTACHING THE BATTERY GRIP TO THE CAMERA
1
Open the battery grip connection cover on the camera, and remove the contact
pin cap on the battery grip.
2
Attach the battery grip to the camera by fitting the contact pin and Attachment
screw of the battery grip to the Battery grip connection terminal and Tripod socket
of the camera as shown above.
3
Secure the battery grip by turning the Attachment wheel firmly in the direction of
the arrow as shown above.
CAUTION
• Make sure the camera and the battery grip are turned off before attaching.
• Leave the cap on when not using the battery grip. Do not touch the contact pin with the cap off.
11