Reset Button; Storage Accessories; Cleaning - Graef FW 700 Mode D'emploi

• After finishing the mincing process, turn the control knob to "Standby".
• Subsequently switch the unit off.
• In order to disassemble the unit, press the release button, remove the attach-
ment; and disassemble all individual parts in reverse sequence.

Reset button

If the unit blocks and switches itself off, let the unit cool down, and press the "Re-
set button". Subsequently set the rotary control to "R" for 5 seconds maximum.
The screw rotates into the opposite direction.

Storage accessories

The no longer needed perforated disc can be stored on the rear side of the unit
in the storage compartment. Press on to the compartment, and then you can
remove the compartment. The plastic parts (support ring, sausage stuffing attach-
ment, former and Kebbe attachment) can be stored in the stuffer.

Cleaning

Clean the unit with a soft moist cloth, and let to dry subsequently. Do not flush
the unit in water and do not immerse it in water.
NOTE
• Pull the mains plug before each cleaning process.
 







27
DE
EN
FR
IT