Bigben TW12CD Mode D'emploi page 21

Using the USB/SD input
1. Plug your USB flash drive or SD card to the USB socket or SD slot.
2. Press SOURCE button to select USB or SD mode, the unit can play automatically. If not, press
3. Press the /
4. Press the VOL+/VOL– to adjust the volume.
Remarks:
• USB/SD port is easy to sensitive equipment, will cause the equipment work is not stable.
USB charging
There is a USB charger on the top of the unit to charge small devices such as smartphones that can
be charged via USB.
Output power: 5V/1A max
Bluetooth Mode
A. Pairing with a Bluetooth cell phone
Please make sure your cell phone is Bluetooth-enabled. Specific pairing steps may vary with different
cell phones. Please refer to the user manual of your cell phone for further information. The general
pairing steps are as follows:
1. Keep TW12CD and Bluetooth cell phone within 1 meter when pairing.
2. Press button, and press the SOURCE to select the Bluetooth mode.
3. Switch on your cell phone's Bluetooth function and search for Bluetooth devices. After the search
is completed, select "TW12CD " from the Bluetooth device list.
4. According to indication, enter password or PIN No: "0000" and press "Yes" or "confirm".
5. After successful pairing, select "TW12CD " from the Bluetooth device list and press "connect".
B. Pairing with a Bluetooth stereo transmitter
Different Bluetooth transmitters have different pairing ways. Please refer to the user manual of your
Bluetooth transmitter for further information. The general pairing steps are as follows:
1. Keep TW12CD and Bluetooth transmitter within 1 meter when pairing.
2. Press button, and press the SOURCE to select the Bluetooth mode.
3. Switch on your Bluetooth transmitter and let it enter pairing mode.
4. The transmitter will search and connect with TW12CD automatically. After successful connecting,
the Bluetooth voice will change when connected successfully.
Remarks:
• TW12CD will return to pairing mode automatically after disconnecting from a Bluetooth device.
C. Music Playback
Connecting with a A2DP cell phone or Bluetooth transmitter
1. Connect your cell phone or Bluetooth transmitter with TW12CD.
2. You can listen to your music from TW12CD now when playing it back.
3. Press Vol+ to turn up the volume, press Vol- to turn down the volume.
4. Press to skip to the previous song.
5. Press to skip to the next song.
to select track.
- EN 8 -
.