How To Recharge; How To Replace Battery; Important - CONTINENTAL EDISON CERVC001 Guide D'utilisation

B. How to recharge
Note: If the machine shuts down when working, the display shows " ! "
and the battery light flashes, that means power shortage and the
machine needs to be recharged.
1. Plug the adapter into the power outlet.
2. Plug the lead in the charging port next to the ON/OFF button.
3. With a sound, three grids electricity dynamically flashing. The
screen shows the charging status. It means the machine is
charged normally.
4. When fully charged, it will beep again. The display show 99% and
three grids electricity fully light up. Then remove the charger.
5. Plug out the charger and power cord.
C. How to replace battery

IMPORTANT:

The battery must not be replaced by the user. For its replacement,
the operation must be performed by a qualified technician . Only
the battery reference recommended by the manufacturer or by the
after-sales service must be used.
1. Open the battery cover and take out
the battery and keep the screws.
Plug the lead in the charging port
next to the ON/OFF button.
3. Replace with new battery; push
down the lock and push the right part
to the left unit your hearing it clicking
into place.
screws on
battery cover
2. Remove the connector. Press the
lock on the connector and pull off.
32