GF JRGUTHERM 2T Notice De Montage Et D'utilisation page 74

E
Item Components
A JRGUTHERM 2T
JRG Code
6325.015
JRG Code
6325.020
B Insulation
C
Allen key
74
Description
Thermal circulation controller with two thermostatically controlled
valves for the calibration of hot water temperature and disinfection
temperature. The switching process is sequence controlled as soon
as the thermostat is triggered by an increased hot water temperature
in the basic volume.
External temperature monitoring is possible with the help of the
optionally available thermometer or temperature sensor (for BMS).
A sealed cap secures the temperature setting from accidental change.
The set temperature value can be read easily at all times.
The packaging of the JRGUTHERM 2T is used as thermal insulation.
The insulation consists of two foam cups made of EPS 30 polystyrene
with the following technical properties:
- Thermal conductivity l
DIN EN 12667
- Fire behaviour 5.1/B1
DIN EN 13501-1
- Application temperature T £ 90°C
Made of tool steel, black, SW4
= 0.033 W/mK
D