Unsatisfactory Efficiency Of The Unit; How To Order Spare Parts; How To Dispose Of The Packing; How To Dispose Of The Unit - BROMIC AS121 Notice De Mode D'emploi Et D'entretien

4. Unit does not start operating when pressing ON/OFF key (the display is turned on): check
microdoor connection keeping in mind that the switch contact must be closed when the door
is closed.

Unsatisfactory efficiency of the unit:

WARNING:
Removal of protections during machine operation is absolutely forbidden. They have been
developed to safeguard the operator's safety.

13 HOW TO ORDER SPARE PARTS

When ordering spare parts make reference to the number written on the unit plate.
WARNING
Worn parts should be replaced only by qualified personnel or by the manufacturer.

14 HOW TO DISPOSE OF THE PACKING

Wooden, plastic, polystyrene packing shall be disposed of according to the regulations in force in the country

15 HOW TO DISPOSE OF THE UNIT

Do not discharge scrapped components in the environment. They should be disposed of by companies
WARNING
Do not discharge the refrigerant in the atmosphere. It should be disposed of by
companies dealing with special waste collection and recovery.
If no defects are found in the unit check that: cold room doors are perfectly tight; there
is no cold dispersion; the cold room is used wisely; no unfrozen liquids or foodstuffs are
placed in the low temperature room; the evaporator is ice-free.
We recommend installation of the machines far from the doors especially when the cold
room is expected to be opened many times a day.
where the unit is used.
dealing with special waste collection and recovery, according to the regulations in force in
the country where the unit is used.
27