TRENDnet TPL-401E Guide D'installation Rapide page 10

Below is an example showing how to create a Powerline network using the TPL-401E and
your existing router to share Internet.
1. Plug a TPL-401E into an available power outlet.
This TPL-401E should be located within the
reach of the router's network cable.
2. Connect a network cable from the TPL-401E to
an available LAN network port on your router
(e.g. TEW-673GRU).
3. Plug a second TPL-401E into an available
power outlet where your remote computer or
network appliances (e.g. Game Console, IP Set
box, network enabled TV, etc.) are located.
8
Outlet
Outlet