LEGRAND Wattstopper FSIR-100 Guide De Démarrage Rapide

No: 24371 – 10/16 rev. 1
Catalog Number • Numéro de Catalogue • Número de Catálogo: FSIR-100
Country of Origin: Made in China • Pays d'origine: Fabriqué en Chine • País de origen: Hecho en China
The FSIR-100 Wireless IR Commissioning Tool is a handheld tool for setup and testing of WattStopper fixture sensors and provides
wireless access for setup and parameter changes. The FSIR-100 display shows menus and prompts to lead you through each process.
The navigation pad provides a familiar way to navigate through the customization fields.
Within a certain mounting height of the sensor, the FSIR-100 allows modification of the system without requiring ladders or tools; simply
with a touch of a few buttons. Range for indoor use is 1–32 feet. Range for outdoor use is 1–15 feet
The FSIR-100 IR transceiver allows bi-directional communication between the sensor and the FSIR-100 configuration tool . Simple
menu screens let you see the current status of the system and make changes. It can change sensor parameters such as high/low
mode, sensitivity, time delay, cut off, setpoints and more.
Products available for use with the FSIR-100 include the FSP-201, FSP-201B, FSP-211, FSP-211B, FSP-221B, and HBP-111.
BATTERIES
The FSIR-100 operates on three
standard 1.5V AAA Alkaline
batteries or three rechargeable
AAA NiMH batteries.
The battery status displays in
the upper right corner of the
display. Three bars next to BAT=
indicates a full battery charge. A
warning appears on the display
when the battery level falls below
a minimum acceptable level.
To conserve battery power, the
FSIR-100 automatically shuts
off 10 minutes after the last key
press.
You navigate from one field to another using (up) or (down) arrow keys. The active field is
indicated by flashing (alternates between yellow text on black background and black text on
yellow background).
Once active, use the Select button to move to a menu or function within the active field.
Value fields are used to adjust parameter settings. They are shown in "less-than/greater-than"
symbols: <value>. Once active, change them using (left) and (right) arrow keys. The left key
increments and the right key decrements a value. Selections wrap-around if you continue
to press the key beyond maximum or minimum values. Moving away from the value field
overwrites the original value. The Home button takes you to the main menu. The Back button
can be thought of as an undo function. It takes you back one screen. Changes that were in
process prior to pressing the key are lost.
The Home (or Main) menu displays after the powerup process completes. It contains information
on the battery status and six menu choices. Press up/down buttons to locate the desired
function then press Select.
Wattstopper
Wireless IR Commissioning Tool
Outil de commande sans fil
Herramienta de puesta en servicio inalámbrica por infrarrojos
Quick Start Guide • Guide de démarrage rapide • Guía de inicio rápido
DESCRIPTION AND OPERATION
IR communication can be affected
by the mounting height of the sensor
and high ambient lighting such as
direct daylight or electric light such
as floodlights, and some halogen,
fluorescent lamps, LED's.
When trying to communicate
with the device, be sure to be
positioned under the sensor without
any obstructions. Every time the
commissionng tool establishes
communication with the device, the
controlled load will cycle.
NAVIGATION
®
IR COMMUNICATION
15'-32'
* Distance may vary depending on
the lighting environment
Power
On/Off
FSP-2X1
HBP-111
Back
Left
Down
IR tx/rx
BAT=
Home/Main
Menu
Up
Right/Next
Select