Names And Functions Of Indicators On Remote Controller - Qlima S34 Série Manuel D'utilisation

Air direction Button: Press this button to change the swing angle of the louver. The swing angle of the
h
louver is 6 for each press. When the louver swings at a certain angle which would affect the cooling and
o
heating effect of the air conditioner, it would automatically change the swing direction. No symbol will
appear in the display area when press this button.
Timer on Button: Press this button to initiate the auto-on time sequence. Each press will increase the
i
auto-timed setting in 30 minutes increments. When the setting time displays 10Hr, each press will increase
the auto-timed setting 60 minutes increments. To cancel the auto-timed program, continue pressing the
button until 0.0 is displayed.
Timer off Button: Press this button to initiate the auto-off time sequence. Each press will increase the
j
auto-timed setting in 30 minutes increments. When the setting time displays 10Hr, each press will increase
the auto-timed setting 60 minutes increments. To cancel the auto-timed program, continue pressing the
button until 0.0 is displayed.
RESET Button: When you press the recessed RESET button, all current settings are cancelled and the con-
k
trol will return to the initial settings.
Indoor Freezing prevention / Turbo Button: Push this button on COOL mode, the air conditioner goes into
l
powerful cooling operation. Push again to cancel the TURBO function. Upon pressing this button (> 2 sec-
onds) the unit will go into the freezing prevention mode. The unit will overrule the indoor temperature
setting and will set it to approx 8 °C. In this way preventing your home from freezing during cold periods
at the lowest possible energy consumption. When this mode is selected the indoor unit display will show
"FP". This button can only be operated in heating mode. To leave the Home Freezing Prevention Mode:
simply press the button once again.
LOCK Button: When you press the recessed LOCK button, all current settings are locked in and the remote
m
controller does not accept any operation except that of the LOCK. Press again to cancel the LOCK mode.
LED DISPLAY Button: Press this button to clear the digit display in the air conditioner. The digit display in
n
the air conditioner will reactivate itself automatically after 3 seconds, when no buttons are being pressed
in this period. Press it again to activate it (Not applicable to units without this function).
Low sound button / indoor freezing prevention: Press this button to decrease the indoor sound pres-
o
sure level to 21 dB(A). The indoor unit fan speed is reduced to its lowest level. Upon pressing this button
(> 2 seconds) the unit will go into the freezing prevention mode. The unit will overrule the indoor tem-
perature setting and will set it to approx 8 °C. In this way preventing your home from freezing during
cold periods at the lowest possible energy consumption. When this mode is selected the indoor unit
display will show "FP". This button can only be operated in heating mode. To leave the Home Freezing
Prevention Mode: simply press the button once again.

Names and Functions of indicators on Remote Controller

auto cool dry heat
SET TEMP. TIMER ONOFF
sleep lock run
4
52 52
fan
2
1
3
4
7
6
5
fig. 2