Warranty Conditions - Messner UV-C 144 Watt PL Instructions D'emploi

Assembly
1. Attach the four G1" threads on the distribution pipe (9) with a sealing
compound and screw on the ball valve (7). Check the right direction of
the ball valve!
2. Attach the G1" threads of the four adapters (5) with sealing compound
and screw onto the ball valve (7).
3. Screw the union nuts (6) onto the adapter (5).
4. Examine the O-rings (15) for damage and screw on the adapter (5).
5. Introduce the four adapters (5) into the angle (4) of the UV-C burner (1).
6. Push the distribution pipe (9) tightly into the three pipe clamps (10).
7. Push the O-rings (15) up to the angle (4) and screw on the union nuts
tightly (6).
8. Clip on the pipe clamp straps (10).
9. Open the ball cocks (7) and restart the water intake.
Winter maintenance
Ice and frost can damage the UV-C Unit! In order to prevent damage, the UV-
C Unit must be emptied and cleaned in the autumn (see UV-C Unit
Cleaning). Store all parts in a frost-free area during the winter months.

WARRANTY CONDITIONS

This equipment comes with a twenty four month warranty (excluding UV-C
lights), which begins on the day of delivery. The sales slip is considered as
proof of purchase for this warranty. We will repair damages based on materi-
al or processing errors within the warranty period free of charge, or replace
the damaged parts, at our discretion. Damages resulting from installation and
operation errors, lime deposits, defective maintenance, frost, normal wear, or
inappropriate attempts to repair the equipment are not covered by this war-
ranty. If the equipment is cut, the warranty expires. We are not liable for
damages resulting from a power loss to the equipment or inappropriate use.
This warranty does not cover breakage of the light's glass or the quartz glass
pipe.
In case of a warranty claim, please send the equipment to us, with the proof
of purchase, through the distributor where you purchased the equipment, free
of charge.
18