Assembly (see Fig. 1-5) The equipment will be supplied fully assem-
bled!
1.
Wall attachment is possible using 3 container drillings (e). See Fig. 2.
2.
Installation below water level is possible. See Fig. 4.
3.
For drain attachments of Ø 110 mm, the water drain connecting (d) must
be cut off. See Fig. 3.
4.
The drain connection (d) Ø 110 mm can be led back to the pond or
basin using commercial drain pipes.
5.
The drain connection (d) Ø 63 mm can be led back to the pond or basin
using a normal hose.
6.
The inlet connection (b) has an internal thread of G2" for connection to
the inlet conductor.
7.
A hose or pipe for dirty water discharge can be connected to the dirt
drain ball valve (f) with an internal thread of G1".
15