Clatronic MRC 396 Mode D'emploi page 20

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
25590-05-MRC 396
Setting the Time
GB
Hours:
Press button 5 (Time Set) and button 9 (Stunde) simultaneously.
Minutes:
Press button 5 (Time Set) and button 8 (Minute) simultaneously.
Setting the Alarm
Hours:
Press button 2 (Alarm Set) and button 9 (Stunde) simultaneously.
Minutes:
Press button 2 (Alarm Set) and button 8 (Minute) simultaneously.
In order to activate the alarm move button 3 (Function) to the "Auto" position; an
LED (4) then lights up in the display.
Beforehand, with the radio in the "ON" position you should tune in a radio station
with the tuning button (7) (Tuning) and set the volume with button 6 (Volume).
In the "Buzzer" position you will be woken by the alarm.
Automatic Interval Alarm (Snooze):
The alarm that has been set to go off automatically can be switched off with this
button (5) for approximately 9 minutes. After approximately 1 hour the alarm swit-
ches off completely until the following day.
Delayed Switch-off (Sleep)
By pressing button 1 (Sleep) the radio is switched on for 59 minutes.
The time the radio remains on can be adjusted with button 8 (Minute).
With button 5 (Time Set/Snooze) the radio can be switched off by hand.
Night light
Switch it ON / OFF with switch (10).
Wavelength changeover switch (FM / AM)
UKW = FM, MW = AM
The station dial (11) shows the wavelength selected for FM and AM.
Changing the night light bulb
Pull the mains plug out of the socket before opening this unit.
Press the knob at the back and at the same time pull the white covering upwards.
Switch the night light on and check that the bulb is firmly seated by turning it. If that
does not work, unscrew it in an anti-clockwise direction and replace it for a new
one.
20
23.07.2003 14:09 Uhr
Seite 20

Publicité

Table des Matières
loading

Table des Matières