Alarm Setup; Detection Sensitivity - VISIOMED BABY iBabyVision VM-CAM2 Manuel D'utilisation

2. A S
LARM ETUP
Motion detection: when this option is selected, you must adjust the sensitivity of
detection via:

Detection sensitivity:

1 minimum sensibility
10 maximum sensibility
Start the motion detection compensation: enable the detection of lights.
Reduces false alarms when changing brightness.
alarm input: when using the external alarm connector, this option must be
enabled.
Trigger level: Adjusts the level of alarm activation.
Alarm notification http: sending an alarm to the url shown in the following field.
Send mail on alarm: sends an email, configured in the previous menu 'email
settings'
Upload image on alarm: sends a burst of six pictures on the mail configured in
the previous menu 'email settings'. The alarm state lasts for 60 seconds.
®
© IBabyVision VM-CAM2 – User Manual V 2 - 201210 49