Task 7: Connecting To Web Promise Advanced Storage Manager (Webpasm) - Promise Technology SmartStor NAS Guide De Démarrage Rapide

Task 7: Connecting to Web Promise Advanced Storage Manager (WebPASM)

Task 7: Connecting to Web Promise Advanced
Storage Manager (WebPASM)
The Web Promise Advanced Storage Manager (WebPASM) software is factory-
installed on the SmartStor system. WebPASM runs in the browser on your PC.
You can access WebPASM:
• From browser directly. See page 19.
• Connect WebPASM from SmartNAVI. See page 19.
From browser directly
To log into WebPASM in your browser:
1. Start your Browser.
2. In the Browser address field, type in the IP address of the SmartStor.
Note that the IP address shown below is only an example. The IP address
you type into your browser will be different.
• WebPASM uses an HTTP connection . . . . . . . . . . . . . . . . . . . .http://
• Enter the SmartStor's IP address . . . . . . . . . . . . . . . 203.67.129.38
• add. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . /admin/
Together, your entry looks like this: http://203.67.129.38/admin/
Connect WebPASM from SmartNAVI
To log into WebPASM from SmartNAVI:
1. Right-click the SmartStor NAS in the Device list.
2. Choose the Open Advanced Management item to
start the browser and open WebPASM
19
SmartNAVI in
Windows
SmartNAVI Mac
OS X