Cleaning, Care & Maintenance; Technical Specifications - Buffalo L310 Mode D'emploi

Cleaning, Care & Maintenance
WARNING: Ensure the appliance has cooled down and is empty before resetting
Always turn off and disconnect the appliance from the power supply before
cleaning. Always allow the appliance to cool before emptying or cleaning.
• Wipe down the exterior of the appliance with a damp cloth.
• Some cleaning agents may cause damage when used for a prolonged period on stainless steel. Use a
suitable stainless steel cleaner.
• Dry the exterior thoroughly.
• Wash all removable parts in warm, soapy water.
Troubleshooting
If your BUFFALO appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The unit is not The unit is not switched on
working
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Thermal cut-out switch has
activated
The thermostat has not been set
correctly
The heating element has failed

Technical Specifications

Model Voltage
L310
230V 50Hz
S047 230V 50Hz
S007 230V 50Hz
L371
230V 50Hz
L077 230V 50Hz
L310_L371_S007_S047_S077_ML_A5_v8_20181116.indb 5
Probable Cause
Check the unit is plugged in correctly and
switched on
Call BUFFALO agent or qualified technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified technician
Reset Thermal cut-out switch (Page 4)
Set the thermostat to a higher temperature
Call BUFFALO agent or qualified technician
Power Current
1300W 5.5A
1300W 5.5A
1300W 5.5A
1300W 5.5A
1300W 5.5A
Solution
Dimensions
Weight
H x W x D mm
245 x 340 x 605 8.5kg
245 x 340 x 605 11kg
245 x 340 x 580 10.5kg
245 x 340 x 580 8kg
295 x 340 x 580 10.7kg
2018/11/16 13:20
UK
5