GE Profile SmartDispense SPBD880 Manuel D'utilisation Et D'installation page 3

WHEN USING THE SMARTDISPENSE
■
Do not wash articles that have been previously
cleaned in, washed in, soaked in or spotted
with gasoline, dry-cleaning solvents or other
flammable or explosive substances, as they give
Use this
off vapors that could ignite or explode.
appliance
only for its
■
Do not add gasoline, dry-cleaning solvent or other
intended
flammable or explosive substances to the tanks.
purpose as
These substances give off vapors that could ignite
described in
or explode.
this Owner's
■
Never reach into drawer while the washer is
Manual.
moving. Wait until the machine has completely
stopped before opening the drawer.
■
Do not store liquid chlorine bleach in tanks.
Use manual flow-through dispenser on the
washing machine for dispensing chlorine bleach.
■
Do not refill tanks with different brands or
concentrations of liquid HE (High Efficiency)
detergents and concentrated liquid fabric
softeners, as this could cause the fluids
to congeal and lead to blockage of
the SmartDispense system.
■
Remove and wash tanks thoroughly before
using a different brand or concentration
of liquid HE (High Efficiency) detergent
and concentrated liquid fabric softener.
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.
SAVE THESE INSTRUCTIONS
PEDESTAL
™
■
Do not slam the pedestal drawer closed. This
could result in damage to the SmartDispense
system.
■
Never attempt to operate this appliance
if it is damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
■
To minimize the possibility of electric shock,
unplug this appliance from the power supply
or disconnect the washer at the building's
distribution panel by removing the fuse
or switching off the circuit breaker before
attempting any maintenance or cleaning.
NOTE: Pressing the power button does NOT
disconnect the appliance from the power supply.
■
Do not tamper with controls.
■
Do not repair or replace any part of the appliance
or attempt any servicing unless specifically
recommended in the owner's manual or in
published user-repair instructions that you
understand and have the skill to carry out.
ge.com
3