Connecting Ac Power - Nortel Networks Business Policy Switch 2000 Guide D'installation

18

Connecting AC power

Required cable: AC power cord that meets the requirements of your local electrical code. Refer to
the table below for plug specifications.
International power cord specifications
Country/plug description
Continental Europe:
• CEE7 standard VII male plug
• Harmonized cord (HAR marking on the outside of the cord
jacket to comply with the CENELEC Harmonized Document
HD-21)
U.S./Canada/Japan:
• NEMA5-15P male plug
• UL-recognized (UL stamped on cord jacket)
• CSA-certified (CSA label secured to the cord)
United Kingdom:
• BS1363 male plug with fuse
• Harmonized cord
Australia:
• AS3112-1981 male plug
Danger: Use only power cords that have a grounding path. Without a proper ground, a
person who touches the switch is in danger of receiving an electrical shock. Lack of a
grounding path to the switch may result in excessive emissions.
209319-A
Specifications Typical plug
220 or 230 VAC
50 Hz
Single phase
100 or 120 VAC
50-60 Hz
Single phase
240 VAC
50 Hz
Single phase
240 VAC
50 Hz
Single phase
228FA
227FA
229FA
230FA