Nortel Networks Business Policy Switch 2000 Guide D'installation page 12

12
Installing a single switch
Note: The bracket with the round opening goes on the right side of the switch, where the
round fan vents are located.
1
Slip a bracket over each side of the switch
with the bracket tabs against the recessed
mounting holes on the bottom of the
switch.
209319-A
9754FA
2
Fasten the brackets to the switch, using
two flat-head screws in each bracket.
To complete the switch installation, go to
"Attaching the switch to the wall" on
page 15.
9758FA