Nortel Networks Business Policy Switch 2000 Guide D'installation page 13

Installing two switches
Note: The bracket with the round opening goes on the right side of the switch, where the
round fan vents are located.
1
Set each bracket with the top tabs of the
bracket against the recessed mounting
holes in the bottom of one switch.
3
Set the second switch on its back panel.
Slide the first switch with attached
brackets over the second switch.
9759FA
2
Fasten the brackets to the bottom of the
switch, using two flathead screws in each
bracket.
9761FA
4
Using two flathead screws in each bracket,
fasten the brackets to the bottom of the
second switch.
9760FA
9762 FA
Business Policy Switch 2000
13