Main Technical Specifi Cations; Installation - CaterChef U-1 Mode D'emploi

Technical specifi cations
Cleaning specifi cations
Water connection
Power connection
Other
Unpacking
Check the machine for any damage which may have occurred during transit immediately after it is unpacked.
If you detect any damage to the machine, retain the packaging material and contact your supplier immediately.
After unpacking, remove the instruction manual and accompanying accessories.
Before installing the machine, check that the mains voltage matches the electrical specifi cations on the model plate
of the dishwasher.
Positioning the dishwashing (to be performed by a qualifi ed fi tter
Situate the machine where it will be used. Using the adjustable feet, adjust the dishwasher until it is level and at the
required height.
Before fi nal installation of the machine, check that the power supply, water inlet hose, drainage outlet and external
soap pump (if present) are connected correctly. Also check that there is enough space to open the door and make
sure that the machine is standing freely and can be accessed easily for everyday cleaning and maintenance.
5. Main technical specifi cations
Max. capacity
Cleaning cycle
Cleaning temperature
Rinsing temperature
Tank capacity
Water use
Diameter of the water
inlet hose
Pressure incoming water
Temp. incoming water
Diameter of drain hose
Required voltage
Tank heating
Boiler/rinse heating
Pump
Total connected power
Total Amps used
Diameter cable
Nominal current on fuse
Max usable washing level
Sound level
Measurements (L×B×H)

6. Installation

- 20 -
Unit
Basket/hour Max. 30 with 120 sec cycle
Sec. 90/120/180 (120 standard)
°C
°C
litre
litre/cycle
cm
2
kg/cm
°C 40 ~ 60
cm
V/Hz/F 220/50/1
Kw 3
Kw 3
Kw 0,4
Kw 3,4
Amps 16
2.
mm 3 x 2,5
A 16
mm
DB
mm
)
CaterChef U-1
60 ~ 65
82 ~ 90
28
2,8
2,5
2 ~ 5
10 ~ 60
2,4
380/50/3
2,8
6
6,4
3 x 16
5 x 2,5
3 x 16
330
< 70
600×600×820