Activation Of The Emergency Stop Button - Refco LFT-230 Mode D'emploi

English
Move the control stick into the required position and carefully press the yellow
operating switch.
Press gently for a slow lifting/lowering speed. Press firmly for a faster lifting/lowering
speed.
Always adjust the lifting/lowering speed in accordance with the lift load.
Ensure that the load is secured before lifting or lowering the device!
The device is fitted with a load-limiting device that disengages the
gearbox unit if required (causing a loud rattling noise). It also
disengages automatically when the maximum lift height is reached.

6.4. Activation of the emergency stop button

14
Instruction Manual LFT-230
The safety catch disengages the
gearbox unit if the operating switch
remains pressed after the maximum
lowered height has been reached
(causing a loud rattling noise), thereby
preventing the wire cable from coiling in
the wrong direction.
Press the red button to stop the
machine immediately in a hazardous
situation.