Transportation; Packaging; Storage - Refco LFT-230 Mode D'emploi

English

5.1. Transportation

Inspect the LFT-230 installation lifter for any potential transportation damage. Any
obvious damage should be reported to the vendor immediately.

5.2. Packaging

Retain the original packaging as it provides optimum protection for transportation of the
device (e.g. onward dispatch of the device, sending it for repair etc.).

5.3. Storage

Permitted storage conditions:
 Storage temperature: -5 to +45 °C
 Humidity: 0 to 90 % relative humidity (no condensation)
Avoid exposure to the following conditions:
 Direct sunlight or proximity to hot objects
 Mechanical vibration, mechanical shock (setting device down too firmly, or dropping
it)
 Soot, steam, dust and corrosive gases
10
Instruction Manual LFT-230