Floor Protection; Moving The Chair - iComfort ic7000 Manuel D'utilisation

ROLLER
Press on the Roller button
button to activate or deactivate it.
TIMING
Press on the Time button
5, 10, 15, 20, 25 or 30 minutes. Press repeatedly on this button to choose the massage time you prefer.
WIDTH
Press on the Width button
under the Knocking and tapping massages. Press repeatedly on this button to choose the intensity you prefer.
OTHER FUNCTIONS
Press one of these buttons to adjust the leg rest angle.
Press one of these buttons to adjust the back rest angle.
TALLER PEOPLE
You can extend the leg massage by up to 15 cm by pressing against the foot section during the massage.
ZERO GRAVITY
You can activate the Zero Gravity feature by pressing the

10. FLOOR PROTECTION

Prolonged use of this massage chair can damage wood floors. To prevent permanent damage, place a carpet or
mat under the chair.

11. MOVING THE CHAIR

Make sure that the AC power cord is pulled out of the chair. Turn the back backward to a proper angle so the
center gravity falls onto the casters. Pull the massage chair forward or backward as you wish.
to activate the foot roller massage in manual mode. Press repeatedly on this
to activate the massage time feature in manual mode. There are six choices
to activate this feature in manual mode. There are three adjustment levels
button on the remote control.