Connecting The Accessories; Programming Massage Mode - Presso Plus PRESSOPLUS03FR Guide D'utilisation

2. CONNECTING THE ACCESSORIES

• Plug in the air hose before turning on the unit.
• System alert sound will be played if it is not connected properly
and the system wont function.
• To turn of the sound, reconnect the plug or turn of the unit.
3. CONNECT THE DEVICE TO THE OUTLET
• Plug the power cord into the outlet corresponding to the country
of use.
4. POWERING ON
• Press the "ON/OFF" button to turn it on.
WARNING !
• Press the "Start/Pause" button to start the pre-programmed
massage mode (Mode : Complete / Time : 15 min).
• Always check the intensity level is at its lowest when starting.
5. PROGRAMMING TIME
• The pre-programmed time for massage is 15 minutes, but you can sche-
dule 20 or 30 minutes. It is not advisable to exceed 30 minutes and to do
more than 3 sessions per day. The machine will stop automatically once
the selected time has elapsed.

6. PROGRAMMING MASSAGE MODE

There are three massage modes to select
according to your needs. The massage
mode will be indicated by means of a light
signal on the main unit.
The mode can be changed at any time by
pressing the "Massage Mode" button.
• SEQUENTIAL : Lymphatic Drainage, helps eliminate liquids, fight excess fat, cellulite and
circulatory disorders. Segmental and external compression has the effect of increasing lym-
phatic drainage.
• CIRCULATORY : Improves blood circulation that causes the thinning of varicose veins and
decreases the sensation of heavy legs.
• FULL (COMPLETE) : Muscle relaxation massage. Pleasant feeling.
18
THREE MASSAGE MODES
CIRCULATORY
SEQUENTIAL
FULL