Bluetooth Operation - Jensen Marine MS2013BT Guide D'installation Et D'operation

BLUETOOTH OPERATION

The MS2013BT includes built-in Bluetooth technology that allows you to connect this head unit
to Bluetooth devices for streaming audio playback.
About Bluetooth Technology
Bluetooth is a short-range wireless radio connectivity technology developed as a cable
replacement for various electronic devices. Bluetooth operates in 2.4 GHz frequency range
and transmits voice and data at speeds up to 1 megabit per second. Bluetooth was launched
by a special interest group (SIG) comprised of Ericsson Inc., Intel Corp., Nokia Corp., Toshiba
and IBM in 1998, and it is currently developed by nearly 2,000 companies worldwide. The
Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such
marks is under license. Other trademarks and trade names are those of their respective
owners.
Bluetooth Menu Options
NOTE: Please note that some BT menu options are only available while the unit is in BT
Audio mode.
Press and hold the AUDIO/MENU button (3) to enter menu adjustment mode. Repeatedly
press the AUDIO/MENU button to access the following Bluetooth Menu options:
• BT ON/OFF: Press the VOL+ or VOL- button to choose "BT ON" or "BT OFF", then press
the ENTER button (18) to select.
• BT PAIR: Press the VOL+ or VOL- button to choose "ON" or "OFF", then press the
ENTER button to select.
• BT DEVICE: Press the ENTER button to view a list of previously paired mobile phone
device models. Press the SEEK/TUNE/TRK buttons (13, 14) to view devices from the list.
You cannot delete a device that is actively connected. Press the ENTER button to select
the device. Press the VOL+ or VOL- button to choose Lock/Unlock, Disconnect or Delete
for this device.
• LOCK/UNLOCK: The MS2013BT can store up to 5 devices for BT connection. The
devices are stored in FIFO (First In First Out) order. To prevent a device from being
bumped from the list when more than 5 devices are used, you must lock the device.
To Lock/Unlock a device, press the ENTER button to display/change the Locked ( )
or Unlocked ( ) icon.
• DISCONNECT: To disconnect a paired device, press the ENTER button to
temporarily remove the BT link. The link can be re-established through your phone
menu by selecting the MS2013BT for connection.
• DELETE: To delete a device from the list, press the ENTER button.
Press Enter
BT Device
Device 1
...
...
...
Device 5
Pairing a Bluetooth Device
Before you begin, consult the owner's manual for the Bluetooth device you want to pair with the
MS2013BT.
1. Make sure the device is on and ready to receive a signal from the MS2013BT. With the
MS2013BT in BT Audio mode, choose BT PAIR from the MS2013BT menu and press the
VOL- button to select ON. The unit is waiting to connect to a mobile phone device. With
the BT function of the mobile phone device turned on, search for a Bluetooth device.
2. When the Bluetooth device has completed it's search, the mobile phone will display the
Bluetooth device name (MS2013BT).
3. Select MS2013BT. The BT AUDIO icon ( ) on the radio LCD will display.
4. Enter the pairing password (0000), if requested.
After connecting successfully, you are able to listen to music stored on your Bluetooth enabled
device through the radio.
Answering a Call
When answering a call using the connected phone, BT AUDIO will pause. After hanging up
from the call, BT AUDIO to continue on some phones. It may be necessary to press the play
button to resume BT AUDIO.
10
MS2013BT
Use VOL+/-
to Navigate
the List
Press Enter
Device 1
Device 2
Device 3
Device 4
Device 5
Lock/Unlock
Disconnect
Delete
Lock/Unlock
Disconnect
Delete