Publicité
Les langues disponibles
Les langues disponibles
-
Attach the antenna on the module with the 4 screws (VIS-TCZ M4x12)
provided with the module.
-
Remove the cap from port RF 1.
-
Connect the antenna to port RF 1 of the module.
Mount with 75 x 75 mm / 0.79 x 0.79 in Standard VESA
mounting bracket M4x12 polier screws provided with
mounting kit)
The antenna cables have a male connector and a female connector.
To antenna
© STid - 20 PA des Pradeaux FR13850 Gréasque – NI1128X01 - Page 3 sur 12 - Ed. 08/01/2020
SPECTRE UHF
Installation procedure
Mounting an Antenna on Module - SLI
Reader Dimensions (mm / in) - SLI
Two mounting possibilities:
Adjustable wall-mounted kit
(refer to the Installation Procedures
for KFX-UHF-08)
Antennas Connection - SLI
Antenna Cables SMI / SLI
UHF SPECTRE
Notice d'installation
Mounting - SLI
Wall
Label
UHF SPECTRE
Manual de instalación
Antenna must be
connected to RF Port 1
Adjustable pole-mounted kit
(refer to the Installation Procedures
for KFX-UHF-09)
To module
US
FR
ES
Pole
Publicité
