Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
High-performance 230V AC universal battery charger with integral switch-mode mains
power supply, for charging all commonly used types of transmitter and receiver batteries,
as well as starter and flight batteries. The unit can charge up to seven batteries simulta-
neously, and the total charge current for all outputs is about 3.6 A.
The charger outputs are sub-divided according to battery type:
•
Outputs 1 + 2 feature an Equalizer and an automatic CC-CV charge cut-off circuit
for LiPo and LiFe batteries.
•
Outputs 3 - 6 are constant-current outputs for NC and NiMH batteries. Output 3
features Delta-Peak charge termination.
•
Output 7 is intended only for charging lead-acid (Pb) batteries, and also features
an automatic CC-CV charge cut-off circuit.
Each output is equipped with a visual monitor in the form of a long-life light-emitting diode
(LED).
SPECIFICATION
Input voltage:
Max. charge current / battery type: Output 1:
Max. output power:
Protective functions:
rity guard
Note: if the maximum output power is reached, the output currents for outputs 1, 2
and 7 are halved.
Operating Instructions
Power Peak ® UNI 7 EQ
230 V AC, 50 Hz
Output 2:
500 mA, 1 - 4 LiPo / LiFe cells
Output 3:
1 A,
Output 4 - 5:
250 mA, 4 - 8 NC / NiMH cells
Output 6:
120 mA, 4 - 8 NC / NiMH cells
Output 7:
500 mA, 2, 6 or 12 V lead-acid battery
36 W
10
1 A,
1 - 4 LiPo / LiFe cells
4 - 8 NC / NiMH cells
Short-circuit guard, reversed pola-
# 30 8564
Publicité
Table des Matières
