About This Guide; Package Contents - Macally LampChargeQi Guide D'utilisation

GB USER GUIDE
Thank you for
LAMPCHARGEQI. The Macally LAMPCHARGEQI
wireless charging LED table lamp is designed to
provide light at your table, desk and nightstand
while keeping your mobile devices fully charged.
This clever lamp doubles as a charger and features
two separate ways to charge your mobile devices.
You can easily charge your Qi-certified smartphone
wirelessly (up to 10W) by placing it on the wireless
charging pad on the wide base of the lamp. Wide
enough to fit any plus size smartphone! You can
charge two devices at the same time at full capacity
as it also has a USB port (5V, 2A) on the front side of
the base to quickly charge your smartphone, tablet
and any other USB powered device. The lamp has a
built-in LED (3000K) with a long lifespan and better
LED energy efficiency compared to traditional
lighting solutions. This is important as we continue
to become increasingly conscious of our ecological
footprint. Conveniently, you can dim the light to
adjust it to your mood, from ambient light to direct
light that brightens up your room! Fully certified,
this wireless charging LED table lamp keeps your
light and devices safe with surge protection,
temperature control, short-circuit protection and
over-current protection. Functional and stylish, the
Macally LAMPCHARGEQI fits on any table, desk,
nightstand, sideboard, etc. in any interior.

About this guide

Before you start using the Macally LAMPCHARGEQI,
be sure to read this guide in its entirety.
Safety intructions
Please read the following carefully before using this
Macally product. Incorrect use of this product may
result in reduced performance, permanent
damage and void warranty:
1. Do not place this product near a heat source.
2. Operating temperature of 5°C to 40°C. Storage
temperature of 0°C to 60°C.
3. Do not place this product near moisture nor
liquids.
4. Operate and store at humidity of 5% to 90%
(non-condensing)
purchasing the
5. Do not place heavy objects on this product.
6. Do not drop this product.
7. Do not dispose this product in the garbage. Take
Macally
it to your local recycling centre.

Package contents

• Lamp base
• Lamp shade
• AC adapter (5ft/150 cm, 12V/2A)
• User guide
Hardware basics
LED light bulb (non-replaceable)
Action button
Press and release:
Turns the light On/Off
Press and hold:
LED brightness
Important notes
• Do not place any metallic objects on the wireless
charging pad.
• Before placing your device on the wireless
charging pad, please remove any protective case
with a ring, pop socket, credit card holder and any
metal plate from your Smartphone. Failing to do so
can cause serious damage to your Smartphone
and charger!
How to setup the LAMPCHARGEQI
Before installing the LAMPCHARGEQI make sure
to remove the plastic film from the lamp shade.
1. Unscrew the lamp shade fastener, attach the
lamp shade and screw the fastener back into place.
1
Adjust the
USB port (5V/2A)
Lamp shade
AC adapter
Lamp shade
fastener
CAUTION: Gets
hot when the LED is
on for a long
period of time!
Wireless charging
pad (10W Max)
Power port