Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
10.
Slide the bag frame tube (1) through the front flap in
the bottom of the bag. See figure 7.
11.
Slide the two lower hopper tubes (10) into the flaps at
the front of the hopper bag as shown in figure 7.
1
12.
Install a rear hopper tube (11) onto the ends of the
lower hopper tubes (10) making sure the holes in the
rear hopper tube are facing up as shown in figure 8.
13.
Secure the rear hopper tube (11) to the lower hopper
tubes (10) with two 1/4" x 1" curved head bolts (26)
and 1/4" nylock nuts (24). See figure 8.
noTe: Hopper bag (3) not shown for clarity.
24
10
26
10
FIGure 7
11
24
10
FIGure 8
14.
Slide the front flaps of the hopper bag up onto the
front of the lower hopper tubes. Secure the bag frame
tube to the lower hopper tubes using two clevis pins
(28) and hair pins (19). See figure 9.
noTe: Be sure front flaps of hopper bag are positioned
above clevis pins.
15.
Snap the sides of the bag to the bottom of the bag at
the front corners .
28
16.
Install a rear hopper tube (11) onto the two upper
hopper tubes (6). See figure 10.
17.
Secure the upper hopper tubes (6) to the rear hopper
tube (11) using two 1/4" x 1" curved head bolts (26)
and 1/4" nylock nuts (24). Bolt heads should face up
as shown in figure 10.
26
5
19
26
24
6
FIGure 9
11
26
24
6
FIGure 10
Publicité
Table des Matières
