Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
cleaned a damp cloth and mild detergent. Although these parts are highly are solvent
resistant, NEVER use solvent.
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
Recommended accessories for use with your tool are available at extra cost from your
local service center.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustments should be performed by certified service centers or other qualified
service organizations, always using identical replacement parts.
Before disposing of damaged, check with your state Environmental
Protection Agency to find out about special restrictions on the disposal of
tool or return them to a certified service center for recycling.
Error Code
Code
51
52
53
54
55
56
57
1English1
ACCESSORIES
PROTECTING THE ENVIRONMENT
Abnormal
Battery
Over Current
Battery
Low Voltage
Battery
Low Temp.
Battery
Over Heat
Short Current
Low Speed Rotation
In running tool stop
(Motor over heat)
In running tool stop
(Motor damage)
English
Troubleshooting
Release the trigger then repress the trigger to
restart up
1.
Replace with the other charged battery.
2.
Re-charge the current battery.
1.
Replace with the other charged battery.
2.
Pre-heat the current battery up to 16℃
1.
Replace with the other charged battery.
2.
Keep the current battery cool down.
(Send the tool to service center checking
and repairing by professional technician)
(Send the tool to service center checking
and repairing by professional technician)
Keep the tool cool down to room temp., press
the trigger to restart up.
Keep the tool cool down to room temp., press
the trigger without action.
(Send the tool to service center checking and
repairing by professional technician)
-15-
Publicité
Table des Matières
