Cleaning - Saeco Milk Island Mode D'emploi

16

CLEANING

CLEANING THE MILK ISLAND
Warning: Do not immerse the Milk Island base in any liquid. Maintenance and cleaning operations
of the base can only be carried out when the machine is cold and disconnected from the power
supply. All components described in this section may be washed in a dishwasher for home use.
Do not use sharp objects or harsh chemical products (solvents) for cleaning. Use a soft dry cloth to
wipe the base. Do not dry the machine and/or its components using a microwave and/or conventional
oven.
1
Remove the carafe from the base.
Remove the handle holding the
carafe by the spout.
4
Remove the suction tube from
the emulsifying group.
7
Carefully clean the valve with
water.
2 2
Remove the emulsifying group
from the carafe.
5
Wash the carafe with hot water
and mild dish soap.
8
Check if the valve is correctly
cleaned by slightly squeezing it
on the sides.
It is advised to use a clean and
properly dried valve.
3
Remove the valve from the
emulsifying group.
6
Wash the emulsifying group with
hot water and mild dish soap.
9
Wash the tube with hot water.