Removing The Milk Island - Saeco Milk Island Mode D'emploi

18

REMOVING THE MILK ISLAND

REMOVING THE MILK ISLAND
Warning: Before removing the Milk Island, remove the water tank, drip tray and coffee grounds
drawer, and empty the coffee bean hopper. Turn the coffee machine off and unplug the machine.
To disconnect the Milk Island, gently position the coffee machine onto its right side, so the left side is
up.
Turn the coffee machine off and unplug the power cord from the socket.
1
Remove the milk carafe from
the base.
4
Insert the protection cover into
its place.
7
Turn the coffee machine
on and follow the start-up
procedure as described in
the machine's operating
instructions.
Once removed from the coffee machine, wash the Milk Island components and place them in a safe place for future
use. If possible we recommend using the original packaging for storage.
2
After having emptied the
containers, delicately turn the
machine onto one side.
5
Using a coin, lock the cover by
turning it as shown in the fi gure.
3
Push the release button, and
remove the base from the
coffee machine.
6
Return the coffee machine
to its upright position, and
replace all components that
were previously removed.