Wall Mounting - Boston Acoustics TVee 10 Mode D'emploi

Place Your System
Decide on the location and position of the system before making any connections.
Soundbar Location
Place the soundbar on a table surface or shelf near the
television, or wall-mount the soundbar above or below
the television.
Keyhole mounts on the rear of the
soundbar permit wall mounting.*
Wall-Mounting
The TVee 10 soundbar can be wall-mounted using the integrated keyhole mounts. A mounting template can be found in
the product carton. Using a level tool, position and tape the template to the wall in the desired location.
Install hardware* using the template as a guide and then remove the mounting template from the wall. Connect your audio
and power cables prior to mounting the soundbar on the wall.
*Consult a person knowledgeable about your wall type to recommend suitable hardware for hanging the speaker. Usually it is
best to leave soundbar off the wall until connections are made.
Connect your system
Next you need to get an input signal from your TV into the TVee soundbar. Select from two easy options.
Option 1 (preferred)
Optical digital cable. Note: The optical cable is a glass fiber; be careful to avoid kinking the cable.
Television Soundbar connection panel
OPTICAL OUT
Optical Digital Cable (13)
5