MWF Kult X Mono Mode D'emploi page 20

▪ Adjust the timer with the + and - (10) buttons.
▪ Change the programme by selecting another programme. In this case, the corresponding symbol
button must be tapped and held for 1 second. This prevents an accidental change of programme
from occurring.
Cleaning and care
▪ Pull out the mains plug before cleaning the appliance.
▪ Ensure that no water gets into the appliance.
▪ Never submerge the appliance, cable or plug in water or any other liquids.
▪ Do not use any cleaning agents that are abrasive or that contain benzine.
▪ Do not bring any flammable (inflammable), acidic or alkaline material or substances close to the
appliance as this could shorten the appliance's working life and a burst of flame can occur when
switching the appliance on.
▪ Wipe down the ceramic area with a damp cloth or you can use a mild, non-abrasive soap solution.
▪ Wipe down the casing and control panel with a damp cloth or you can use a mild cleaning agent.
▪ Dry the whole appliance completely before next use.
Errors
Problem:
The appliance is not working.
The appliance cannot be started,
is beeping and the display is
showing error message "E0".
The appliance switched itself off
during operation.
Display shows error message
"E01/E02".
Display shows error message
"E03/E04/E05".
The indicator light of
the on/off button is on, but the
appliance isn't heating up.
The appliance was on standby
and switched itself off.
20
Cause:
The mains plug is not connected
to a socket.
There is no or unsuitable cook-
ware on the hob.
The appliance gets too hot.
The set time has elapsed and the
appliance has ended the heating
process.
The over-/undervoltage protec-
tion feature was triggered.
The overheating protection
mechanism has been triggered.
The appliance is on standby, the
heating function is not activated.
The automatic shut-off feature
was triggered as the appliance
was not in use.
Solution:
Plug the mains plug into a
socket.
Never use the appliance without
cookware. Only use cookware
that is suitable for use with
inductions hobs. Follow the
safety instructions for your
cookware.
Unplug the mains plug and clean
the ventilation slots if neces-
sary. Allow the appliance to cool
down.
If the food you are cooking is
not hot enough, extend the
cooking time.
Ensure appropriate power supply
to the appliance.
Switch off the appliance and
cool it down, unplug it from the
mains and switch it back on.
Select the type of operation, e.g.
operation by power level or by
direct select programmes.
Switch the appliance back on
when you want to use it.