MWF Kult X Mono Mode D'emploi page 18

Operating procedure
The induction hob offers 3 different functions:
▪ Use of the power levels 1-8 without timer function
▪ Use of the power levels 1-8 with timer function
▪ Using direct select programmes (8)
Use of the power levels (7) without timer function
Action
Plug the appliance in. Appliance is in standby mode.
Tap the On/Off button; appliance is in operational readiness
mode
Position the pan on the hob.
Set the desired power level 1-8.
Tap the Start/Pause button. Cooking process starts.
The "Appliance in use" symbol is shown in the display
Adjust the power level as required, e.g. when the boiling
point is reached.
If necessary, tap the Start/Pause button again:
- Cooking process is paused
- The "Appliance in use" symbol disappears
- Start/Pause LED fl ashes
- Tap on the Start/Pause button to resume the cooking
process
Switching off the hob by pushing the On/Off button twice.
Note: The fan runs on for a few seconds.
Pull out plug.
Note: If the induction hob is in pause mode it switches itself to standby automatically after 10
minutes if the control panel is not operated.
Use of the power levels (7) with timer function
Action
Plug the appliance in. Appliance is in standby mode.
Tap the On/Off button, appliance is in operational readiness
mode.
Position the pan on the hotplate.
Set the desired power level 1-8.
Set the timer with +/- buttons.
Tap the Start/Pause button. Cooking process and Timer
starts. The "Appliance in use" symbol is shown in the display
Change the power level if required
18
Touch button Display
Touch button Display