Alecto DVC126IP Mode D'emploi page 9

INSTALLATION.
Connect the LAN network if ne-
cessary, or use WiFi.
Connect the AC adapter to
the power socket (5V) of the
camera. Wait 2 minutes for the
camera to starts up.
micro
SD
Insert a micro SD card
(required for firmware updates).
Press the reset button with a
paper clip until the indicator LED
starts flashing and the voice
prompt is audible.
See Quick Starters Guide for registering the
camera to the app.
motion detection
Side View
2 meter
2 m 3 m 4 m 5 m
-9-