Machine Components; Scope Of Delivery - GEHA top secret 270 Notice D'utilisation

3 Machine components

1 2 3 4 5
1 Door
2 Feed opening
3 Safety instructions
4 LEDs
Paper shredder is ready for operation.
Paper jam or motor overloaded
Cut material container full or door open
5 Rocker switch
: On
: Off, Reverse

4 Scope of delivery

• Paper shredder, ready for connection, in car-
ton packing
• 5 Bags for shredded material
• Special cutting block oil 50 ml (cross cut)
• Operating instructions
Acces so ries:
• Bag for shredded material
order No.: 1.410.995.000
• Special cutting block oil 250 ml
order No.: 1.235.997.403
8
5 Operation
Switching the paper shredder on
• Press rocker switch .

 R ocker switch locks in place.
 Green LED lights.
 Paper shredder is ready for opera-
tion (standby).
Feed paper
• Insert the paper to be destroyed.
See „Technical data" for sheet
capacity.
 The shredding pro cess is star-
ted by a pho to –cell in the paper
feeding opening.
 Paper is pulled into cutting
system and shredded.
 When the paper fee ding
opening is free again, the cut-
ting sy stem au to ma tical ly swit-
ches off af ter app rox. 3 sec. and
returns to standby.
Shredding CDs, credit cards and
disks (see "Proper Use")
CAUTION!
Depending on the type of material,
splinters could be produced when
shredding CDs. For this reason,
wear protective goggles.
Insert CD/credit card/disk in centre of the feed
opening.
Swit ching paper shredder off
• Tap rocker switch .
 Switch returns to ze ro po si ti on.

Geha top secret 270
1003