Cable Test Settings; Set Project Options; Cable Type; Cable Labeling - Softing IT Networks NetXpert XG Guide De Démarrage Rapide

5. Cable Test Settings

From the home screen, touch
ject specific settings can be made here. Moreover, a new test can be started from here.
At Cable Test
matically (example below: menu option "Cable Test").
On the left-hand
side, the various
menus are listed
and, if already
created, the list of
the tested cables.
A qualification test can directly be started by touching the

6. Set project options

Touch the Projects + Reports
7. Select cable type
Touch the

Cable Type

Important: Before running a test, it is necessary to select the correct type of cable,
otherwise the result could be affected.

8. Cable labeling

Touch the Cable Labeling
This will help to retrieve and allocate the measurements more easily later on.
itnetworks.softing.com/XG
Cable Test
there are several menu options. The last selection is displayed auto-
icon to make general settings for your test project.
icon on the left to select or configure different cable types.
icon to define the labeling of the individual measurements.
to display the cable test menu. Further pro-
Test
On the right-
hand side, the
test result of the
cable selected
on the left is
displayed.
button.
21