Gas Outlet Tubing "Cold Zone": Connection To The Stop Cock; Gas Outlet Tubing: Connection To The Titrator - Mettler Toledo DO307 Mode D'emploi

Installation

4.2.2 Gas outlet tubing "cold zone": connection to the stop cock

4.2.3 Gas outlet tubing: connection to the titrator

Insulation
Coupling
Tubing nipple
8
– Connect the drying unit to the gas inlet of the
– Connect the stop cock with the gas outlet of
Gas outlet
– Push the slot of the coupling of the insulated
– Screw the tubing nipple into the coupling in
– To remove the tubing, turn the nipple counter-
sample tube.
the "cold zone".
tubing over the gas outlet.
the direction shown so that the coupling is
firmly seated.
clockwise and pull off the coupling.
DO307
METTLER TOLEDO