Amprobe AT-7000 Série Manuel De L'utilisateur page 33

5. MAINTENANCE
Changing receiver battery:
The battery compartment on the back of the AT-7000-R is designed to make changing
batteries easy. Four (4) AA 1.5V alkaline or 1.2V rechargeable batteries may be used.
Battery Cover
1. Make sure that the Receiver is turned off.
2. Use screw driver to unscrew the captive screw.
3. Remove the battery cover.
4. Install batteries using the battery clip.
5. Replace the battery cover and secure it with the
provided screw.
Figure 5.2: Changing receiver battery
29
Screws
4 x AA batteries