Sc-7000 Signal Clamp (At-7030 Kit); Hand Guard - Amprobe AT-7000 Série Manuel De L'utilisateur

2. KIT COMPONENTS
2.4 SC-7000 Signal Clamp
(included with AT-7030, option for AT-7020)
The clamp accessory is used for applications
when there is no access to the bare
JAW
conductors. The clamp attachment enables
the AT-7000-T Transmitter to induce a
signal through the insulation into either
energized or de-energized wires. The
signal will travel through the wire in both

HAND GUARD

directions and into all the branches. This
transmission method will not damage any
sensitive electronic equipment connected to
JAW TRIGGER
the circuit.
INPUT LEADS WITH
BANANA PLUG
10